Cofiguration options for updating windows xp professional
For this command to work, you need to be logged on with an account that has administrative rights on the remote system: 7.Enable and disable Windows Firewall—Netsh can work with the built-in Windows Firewall.With the release of Windows Server 2008, the older Netsh firewall commands have been deprecated and replaced by the advfirewall commands.The following commands show how to disable then re-enable the Windows Firewall: 5.Display network adapters and their status—Many of the Netsh configuration commands require you to supply the name of the interface that you want to configure.The default value is usually Local Area Connection, but many administrators and users change this value.Configure a network adapter with the address of a DNS server—When you change the system's IP address type to static, you typically need to change the DNS configuration as well.
To find the name of the system's network adapters or a system's wireless network adapters, use the following commands: 4.
Configure a network adapter to use a static IP address—The following example shows how you use Netsh to set the IP address of the network adapter named Local Area Connection to 192.168.0.100, the subnet mask to 255.255.255.0, and the gateway address to 192.168.0.254: 3.
Netsh is a powerful and indispensible command-line tool for updating Windows network configuration settings.
However, the variety of options available with Netsh can make it confusing to work with.
In this column, I'll show you ten ready-to-use examples of Netsh commands for some of the most widely used network functions.For more information about Netsh, you can download "Windows Server 2008 Network Shell (Netsh) Technical Reference" from the Microsoft Download Center. Show the system's current IP configuration—You can use the following command to see if the system is using DHCP or static addressing as well as to show the system's current IP address, submask, gateway address, and DNS server: 9.