Dhcp not updating dns server 2016


04-Jun-2016 11:57

This topic describes the Dynamic Host Configuration Protocol (DHCP) functionality that is new or changed in Windows Server 2016.

Hi, My parents Windows 7 PC has suddenly stopped being able to connect to the Internet.

Using the "Diagnose problem" feature in the Manage Network Interfaces panel results in a message claiming that it cannot reach the DNS server and that the connection needs to be reset. It is connected to a DSL router via an ethernet cable.

The NIC is set to dynamically receive its IP and DNS settings via DHCP which it obtains from the DSL router.

Executing ipconfig from a DOS prompt shows that this is occurring as expected, with an assigned IP of 192.168.2.10.

I also tried static settings in the available range and tried using open DNS IP addresses.

They also have a laptop which connects to the same router wirelessly using DHCP and it is working fine.

dhcp not updating dns server 2016-76

Seksi chat uzivo srbija

The gateway and dns are set to the IP address of the router, which is 192.168.2.1.Note that I can't even ping the router at 192.168.2.1.Naturally, I started suspecting a virus, but a full system scan using Mc Affee produced nothing.If it was a DNS changing virus, would I not still be able to ping the router using the IP address?

Using this laptop, I can log into the router and see both it and the problem PC in the list of connected devices, each with the dynamically assigned IP addresses as seen using ipconfig on each.

Unplugging the ethernet cable shows the connection status changing in the list of connected devices in the router.